Dear all Flashforge users, the upgrade has been done and the FlashCloud has been available for use now. Thanks for your support. 

How to load and unload filament?

816
2019-07-18
FAQ

The printer needs to load filament to print, and when it is not used for a long time, the filament needs to be stored properly to avoid filament material damage.

You can use "loading" and "unloading" to do two operations respectively.After taping the button, the nozzle is heated until the temperature is high enough to melt the filament.At this time,load filament.Insert filament from the reserved filament inlet on the nozzle until you feel that the filament has been stuck by the filament motor and has been fed into it continuously.In order to unload the filament, the filament should be sent in manually until the filament top melt. At this time, press the press plate on the side of the filament inlet to loosen the filament clip and quickly pull out the filament.

Return To Question List
3D PRINTER SOLUTION
JEWELRY INDUSTRY
3D Printing Channel Letter Solution
DENTAL INDUSTRY
3D PRINTER CATEGORY
Professional
Consumer
Material
Software
SUPPORT
Video Center
After-Sales Policy
Download Center
FAQ
Privacy Policy
SUBSCRIBE
Zhejiang Flashforge 3D Technology Co., Ltd Tel : 400-886-6023