How to replace the nozzle?

3294
2021-12-06
Adventurer 4

1. Press the left and right clips and pull out the nozzle.
2. Push in the filament through the filament intake manually, making it long enough to be cut off;
3. Rotate the filament spool anti-clockwise manually, making filament retreat a little; Press the left and right clips, install the new nozzle. Make sure the nozzle slot and bottom of the extruder are on the same level.
4. Tap [Prepare] -- [Load], filament coming out of the new nozzle indicates successful replacement.
 

Whether the extruder assembly is in place is judged as follows:
1. When installed, the extruder must be pushed to the  end;
2.Check whether the installation is in place：
 ①Touch the black buckle and the lower shell of the  white extruder, make sure no hollows are felt；
 ②Observe to make sure there is no large gap in the joint of the black buckle and the lower shell of the white extruder
 

Return To Question List
3D PRINTER SOLUTION
Dental Industry
Jewelry Industry
3D Channel Letter
FDM Printer
Resin Printer
3D PRINTER CATEGORY
Professional
Consumer
Material
Software
SUPPORT
Video Center
After-Sales Policy
Download Center
FAQ
Privacy Policy
JOIN OUR NEWSLETTER
400-886-6023
Zhejiang Flashforge 3D Technology Co., Ltd 浙ICP备19026245号-1