3d printer faq

Shop All Materials

Filament Guides

Is Adventurer 3 capable to be turned off automatically after the printing job is finished?

7934

2021-11-26
Cannot find printing files when using a USB drive.

13462

2021-11-26
Adventurer3 starts printing when the distance between the extruder and build plate is still large, causing filament cannot stick to the build plate and print fails.

6234

2021-11-26
What is the difference between filament load and filament replacement?

6139

2021-11-26
The extruder makes out chug noise and no filament comes out of the extruder, what is the problem and how to solve it?

6941

2021-11-26
After replacing the nozzle completed, the printer status displays the extruder temperature is 300°C, the extruder fan is also working, what is the problem and how to solve it?

9885

2021-11-26
Is it a must to add a raft before printing the model?

6357

2021-11-26
How to solve if printing result has edge warp?

6201

2021-11-26
Is the ABS printing safe?

6894

2021-11-26
What kinds of file formats does Adventurer 3 support?

10889

2021-11-26
How to solve if the nozzle is clogged?

13505

2021-11-26
Is Adventurer 3 compatible with all kinds of AC power input?

6214

2021-11-26
Can we use another brand filament which is not produced by Flashforge?

8356

2021-11-26
How to solve if the distance between nozzle and platform is too large (far away) or to small (hit) during printing?

6344

2021-11-26
How to take down the model

6103

2021-11-26
How to replace the filament?

8513

2021-11-26
How to solve if no filament come out of extruder after tap [Build] model file and extruder begins moving normally?

6396

2021-11-26
How to solve if the displayed temperature is abnormal after replacing the nozzle?

8545

2021-11-26
Do we need to do extruder calibration again after replacing the nozzle?

6192

2021-11-26
How to replace the nozzle?

15997

2021-11-26