Filament Technical Parameters | Tensile Strength | 45-49 MPa | 45.5-49 MPa | 50-60 MPa | 35-40 MPa | 33-37 MPa | 40-45 MPa | 35-40 MPa | 42-45 MPa | 15-20 MPa | 40-45 MPa | 40-43 MPa |
Flexural Strength | 69-75 MPa | 73-76 MPa | 75-79 MPa | 65-70 MPa | 65-67 MPa | 50-55 MPa | 45-50 MPa | 75-79 MPa | <10 MPa | 85-95 MPa | 75-85 MPa | |
Water Absorption (Equilibrium in Water, 23℃) | <0.3 | <0.3 | <0.3 | 1 | 1 | <0.2 | <0.2 | 1 | 0.5 | 0.5 | 0.8 | |
Soluble with Common Solvents | Soluble In Acetone | Soluble In Acetone | ||||||||||
Print Setting Parameters | Print with Enclosure | |||||||||||
Nozzle Size | All Size | All Size | All Size | All Size | All Size | All Size | All Size | All Size | All Size | 0.6/0.8mm | 0.6/0.8mm | |
Nozzle Temperature | 190-220 °C | 190-220 °C | 190-220 °C | 220-240 °C | 220-240 °C | 220-240 °C | 220-240 °C | 240-260 °C | 190-230 °C | 200-230 °C | 230-250 °C | |
Bed Temperature | 25-60 °C | 25-60 °C | 25-60 °C | 100-110 °C | 80-100 °C | 70-80 °C | 70-80 °C | 100-120 °C | 25-60 °C | 25-60 °C | 60-80 °C | |
Hardened Nozzle Required | ||||||||||||
Cooling Fan Required | ||||||||||||
Normally Print Speed | 40-60 mm/s | 40-60 mm/s | 60-150 mm/s | 40-60 mm/s | 40-60 mm/s | 40-60 mm/s | 40-60 mm/s | 40-60 mm/s | 20-40 mm/s | 40-60 mm/s | 40-60 mm/s | |
Printable with Glass Bed | With Glue | With Glue | With Glue | |||||||||
Printable with PEI Plate | N/A | |||||||||||
Printable with Sticker | ||||||||||||
Post-print | Annealing Treatment | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | ||
Recommended Application Scenarios | Hobby Creative DesignArtwork | Prototyping Functional Parts | Prototyping Artwork | Consumer Product Functional Parts | Mechanical Parts Tooling | Mechanical Parts Medical Devices Containers & Packages | Containers & Packages Medical Devices Industrial Prototypes | Mechanical Parts Pipes Functional Parts | Consumer Product Functional Parts Artwork | Prototyping Lightweight Structures | Medical Devices Functional Parts Mechanical Parts |