3d printer faq

Shop All Materials

Filament Guides

The extruder makes out chug noise and no filament comes out of the extruder, what is the problem and how to solve?

7316

2021-12-06
What is the difference between filament loading, filament replacement and manual mode?

5220

2021-12-06
What kinds of file formats does Adventurer 4 support?

6938

2021-12-06
Is Adventurer 3 compatible with all kinds of AC power input?

6217

2021-11-26
Can we use another brand filament which is not produced by Flashforge?

8367

2021-11-26
How to solve if the distance between nozzle and platform is too large (far away) or to small (hit) during printing?

6349

2021-11-26
How to take down the model

6106

2021-11-26
How to replace the filament?

8521

2021-11-26
How to solve if no filament come out of extruder after tap [Build] model file and extruder begins moving normally?

6405

2021-11-26
How to solve if the displayed temperature is abnormal after replacing the nozzle?

8558

2021-11-26
Do we need to do extruder calibration again after replacing the nozzle?

6194

2021-11-26
How to replace the nozzle?

16020

2021-11-26
How to solve if the nozzle is clogged?

13532

2021-11-26
Is it a must to add a raft before printing the model?

6362

2021-11-26
What kinds of file formats does Adventurer 3 support?

10911

2021-11-26
Cannot find printing files when using a USB drive.

13475

2021-11-26
Adventurer3 starts printing when the distance between the extruder and build plate is still large, causing filament cannot stick to the build plate and print fails.

6241

2021-11-26
What is the difference between filament load and filament replacement?

6141

2021-11-26
The extruder makes out chug noise and no filament comes out of the extruder, what is the problem and how to solve it?

6944

2021-11-26
After replacing the nozzle completed, the printer status displays the extruder temperature is 300°C, the extruder fan is also working, what is the problem and how to solve it?

9912

2021-11-26
How to solve if printing result has edge warp?

6204

2021-11-26
Is the ABS printing safe?

6901

2021-11-26
Is Adventurer 3 capable to be turned off automatically after the printing job is finished?

7943

2021-11-26
How do I update the device to the latest version?

28878

2019-07-30
How can I use a computer to control the printer to print?

32659

2019-07-30
Why often printing with no filament out of the nozzle and it still does not work after cleaning the nozzle?

7952

2019-07-30
What should I do if my printing platform is dirty and bumpy?

7752

2019-07-30
Why can't my model be read by the printer?

14577

2019-07-26
Why does the nozzle produce no filament when printing? Thin filament?

9276

2019-07-19
Why is the printed model out of the print platform? It's not printed at all?

8600

2019-07-19

<
1
2
3
4
>